Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Flashing Replacement: The Santa Clarita Owner’s Guide
CertainTeed flashing replacement in Santa Clarita typically runs $350 to $900 installed, depending on the flashing location (step flashing, chimney, pipe boot, or valley) and how much of the surrounding shingle needs to be lifted and re-seated. We stock CertainTeed-compatible flashing on our trucks, and most flashing replacements are completed in a single visit. Homeowners usually discover the failure one of two ways: a water stain blooming on a ceiling after a Santa Clarita winter rain, or a roofer pointing it out during a routine inspection after a summer of 105-degree days has baked the old metal until it cracked or pulled loose.
Key Takeaways:
- Installed flashing replacement: $350 – $900 in Santa Clarita, with a written price before work starts
- Most flashing failures trace to thermal cycling – the repeated expansion and contraction from our high-desert heat
- CertainTeed warranties cover shingles, not flashing – flashing replacement is a maintenance item
- Every repair is backed by our 365-Day Done Right Promise, in writing
Which CertainTeed Models This Applies To
This guide applies to any roof with CertainTeed shingles – Landmark, Landmark Pro, Presidential Shake, XT 25, Grand Manor, or Northgate – but the flashing itself matters more than the shingle line. CertainTeed doesn’t manufacture its own flashing; they specify compatible materials and installation methods in their roofing system manuals. What matters for your Santa Clarita home is that the flashing gauge, width, and profile match both the shingle course height and the specific penetration it’s sealing. Most residential flashing runs 26-gauge or 28-gauge galvanized steel, but for Santa Clarita’s intense UV exposure, we recommend 26-gauge minimum – the thinner 28-gauge stock degrades noticeably faster here.
The compatibility gotcha most owners miss: chimney and sidewall step flashing must be interwoven with each shingle course, not just placed behind the shingle. If a previous contractor surface-mounted the flashing with roofing cement, it fails early. Like clockwork. We see it all over Stevenson Ranch, Saugus, and Valencia – a “new” roof with flashing that leaks within two to three years because the metal wasn’t woven properly. OEM vs aftermarket matters less than the install method and the metal gauge, but we spec flashing that matches CertainTeed’s own system documentation so the shingle-to-metal interface stays watertight.
Styles & brands we work with






Signs Your CertainTeed Flashing Replacement Is Failing
- Ceiling stains near the chimney or exterior wall line. Water travels along the flashing channel before it drops; the stain often shows up a few feet from the actual failure point. In Santa Clarita, your first rain after a long dry stretch is when these stains surface – sometimes weeks after the water actually got in.
- Rust streaks on brick or stucco below the flashing. That’s dissolved metal washing down the face of your chimney or wall. Once rust is visible, the flashing is already thinning and will crack within a season or two.
- Shingles lifting or curling where they meet walls, chimneys, and pipes. Flashing that’s pulling away from the wall surface creates a gap that wind-driven rain will exploit. Same with rubber pipe boots that have baked hard and split in the sun.
- Granules collecting in gutters directly below a flashing run. Loose flashing abrades the shingle edges; the shingle sheds granules faster there than anywhere else on the roof.
- Interior wall moisture after a strong wind event. Santa Clarita gets gusty winters, and wind can drive rain sideways under failed step flashing. If you only see dampness after windy storms, flashing is the prime suspect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Let’s talk real numbers for Santa Clarita. Most standard flashing replacements – a pipe boot, a single wall run, a chimney corner repair – land between $350 and $650 installed. Full chimney flashing replacements with a new cricket or counter-flashing run $700 to $900. What drives the spread is access: a one-story ranch in Canyon Country with an easy pitch costs less than a two-story in Stevenson Ranch with a steep slope and tricky chimney geometry.
That price includes the flashing material, required sealants, lifting and re-seating the surrounding shingles, and haul-away of the old metal. It also includes the written guarantee that backs every Crestview repair for 365 days. The price you’re quoted is the price on the invoice – no change orders, no “we found additional rot” upsell game. If the repair fails within a year, we come back at no charge. Dylan Pace started this company in 2000 on exactly that standard: “Every estimate we hand you is one we’d be comfortable signing twice.” We’re an independent Santa Clarita roofing contractor – not affiliated with CertainTeed – which means we install and repair with manufacturer-spec materials, but our guarantee is our own, and it’s in writing.
DIY or Call Us?
Here’s the honest split. What you can safely do yourself: look for visible rust, check pipe boots for cracks and brittleness, inspect the attic for water stains, and run a hose on the roof (with someone inside watching) to confirm where water enters. That’s diagnosis, and it helps you have an informed conversation when you call.
What we don’t recommend for homeowners: pulling up shingles to replace step flashing. Once you break the shingle seal, you’re now responsible for re-nailing, re-sealing, and interweaving flashing correctly, and getting any of it wrong means a leak that quietly rots your decking until the next rain exposes it. Roof work on a ladder with tools and materials while leaning over an edge is also genuinely dangerous – falls are the leading cause of job-site injury for a reason. If the flashing is simply bent or loose at one corner, a repair can work. If it’s rusted through or the surrounding shingles are compromised, replacement is the honest answer. Call (661) 219-7793 and we’ll put a number on it – free estimate, no pressure.
FAQs
Galvanized steel flashing in Santa Clarita typically lasts 15 to 25 years before UV degradation and thermal cycling take their toll. Pipe boots and valley flashing exposed to our summer sun, with its regular 100-plus degree roof surface temperatures, trend toward the lower end. Chimney flashing with proper counter-flashing lasts longer. Call us at (661) 219-7793 and we’ll inspect yours for free before you guess.
Sometimes yes – a loose seam or a small tear can be patched with compatible sealant. But if the metal is rusted through, pulled away from the wall, or the shingles around it are lifting, a repair won’t hold another Santa Clarita winter. We’ll tell you either way and quote both options in writing.
Most flashing replacements in Santa Clarita take 2 to 4 hours on site. Full chimney flashing rebuilds with brick counter-flashing take a full day. We’ll give you an exact window when you book, and you’ll get a live arrival time so you’re not waiting on a four-hour maybe.
Yes. Our trucks carry 26-gauge step flashing, chimney flashing rolls, pipe boots, and compatible sealants so most jobs are completed same-visit. For GAF and Owens Corning system homes we also carry matching profiles when specified.
If you’ve spotted rust streaks, a stain, or just have a gut feeling the flashing on your CertainTeed roof in Santa Clarita is past its prime, call (661) 219-7793 to schedule a free estimate. You’ll get a written price before any work starts, photos before and after, and a one-year written guarantee on the repair.
Written by Dylan Pace, Owner, Crestview Roofing Co Santa Clarita at Crestview Roofing Co Santa Clarita, serving Santa Clarita and nearby areas.